Amazon Kuiper Manufacturing Enterprises LLC

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.The Role:Be part of Project Kuiper’s sub-team responsible for defining and implementing the digital chip SOCs for communications via Low Earth Orbit satellites and Amazon gateways. This is a unique opportunity to define a groundbreaking wireless solution with few legacy constraints. The team works with customer requirements and wireless system teams to define modems, high-speed interfaces, embedded processors, and DSP solutions in latest CMOS generation technologies.In this role you will:· Implement a state of the art verification environment to facilitate testing of the RTL against reference Matlab/C models· Develop detailed test plans and write tests, run regressions, collect coverage matrices and report progress to the program· Utilize the emulation platform to improve and strengthen pre-silicon verification flow· Collaborate with cross-functional teams to leverage emulation platform for end-to-end integration testing· Work with tool vendors and drive enhancements in emulation methodology· Participate in the validation of FPGAs using test benches, which can be reused for the ASIC implementation· Run formal verification of complex blocks to ensure functional correctness· Work with the design and communication systems team and participate in system level verification using test benches constructed using UVM, System C and DPI-C· Develop a highly automated environment to run regressions that can be used to make builds and maintain organization of the databaseExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS - Bachelor's degree in Electrical / Communications Engineering or Computer Science, or related field, or equivalent experience - 15+ years of experience in verification preferably in communication systems - 5+ years of experience in UVM, C, System C, and scripting - 3+ years of experience in emulation ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. As SW Engineer for antenna systems, you will collaborate with systems architects, HW engineering design teams & FW/SW design teams to bring up and test systems combining FPGA, firmware, RF, and networking functions and will help to build advanced tools for the following: - Characterizing subsystems and systems related to antennas - Complex data storage - HW test automation - FW design and implementation - Application development - Design automation for 2D and 3D structures - Develop bring up tools and scripts for phased array systemsExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. BASIC QUALIFICATIONS- 5+ years of non-internship professional software development experience- 5+ years of programming with at least one software programming language experience- 5+ years of leading design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience as a mentor, tech lead or leading an engineering team ...

Have you ever wanted to be part of a team who is building industry changing technology? Amazon's Project Kuiper is an initiative to launch a constellation of low earth orbit satellites that will provide low-latency, high-speed broadband internet connectivity to unserved and under-served communities around the world.Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilitiesAs a System Dev Engineer II, you will play a pivotal role in shaping our team. You will become a subject matter expert across multiple services, guiding their development, deployment, operation, and growth within our network. Utilize data trends and metrics to pinpoint areas for enhancement, contributing to the continuous improvement of our services. Actively refine and enhance team procedures and processes, as well as those utilized by internal stakeholders. Tackle new and ambiguous challenges with a commitment to high-quality development, consistently delivering solutions that have a direct impact on customers.A day in the lifeYou will be instrumental in automating and productionizing Kuiper's network infrastructure and systems. Focus on simplifying, reinventing, and innovating systems, processes, and tools to elevate the customer experience. Craft unique and effective solutions to complex technical issues faced by our customers. Engage in continuous learning and development by working alongside and gaining insights from Amazon's senior and Principal engineers. Contribute to the team's growth through coaching, hiring, and developing team members.BASIC QUALIFICATIONS- 2+ years of non-internship professional software development experience- 1+ years of designing or architecting (design patterns, reliability and scaling) of new and existing systems experience- 3+ years of administrative experience in networking, storage systems, operating systems and hands-on systems engineering experience- Knowledge of systems engineering fundamentals (networking, storage, operating systems)- Experience programming with at least one modern language such as C++, C#, Java, Python, Golang, PowerShell, Ruby ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. Project Kuiper is seeking a Production Supervisor to join the Space Simulation Test Lab to support production. This role will work closely with management to supervise a technician team that supports environmental test or satellite components as well as full vehicle testing. The individual will have strong leadership skills and be required to work on multiple projects in a fast-paced environment where communication and organization will be critical. This position will also utilize a variety of analytical tools as well as aid in creating a variety of laboratory procedures which they will help to draft and maintain. This will require supervisory duties as well as working as an operator in the test lab. Key job responsibilities- Test sub assemblies and vehicle in development and production environment. - Supervise a team of technicians focused on early production and scaling output.- Work with management to plan and coordinate daily tasks for technicians and activities of all operations with an ability to adapt to changing schedules and other dynamic priorities.- Work cross-functionally with management, facilities, and supply chain to maintain operations and materials the Space Simulation Test Lab- Ability to provide timely feedback on designs, processes, and custom equipment used in routine prototyping, fabrication, and characterization.- Author, maintain, and train others to all relevant process documentation, including Assembly, Inspection, Testing/In-Process Characterization, and Packaging Procedures.- Review and approve rework to ensure accuracy and enforce traceability.- Comply with all Company Policies including Health, Safety, and Environmental Regulations, Personal Protective Equipment Requirements, and Standard Operating Procedures.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeA Production Supervisor in this role will play a valuable part in ensuring hardware is ready to be integrated on a satellite. You will have to be comfortable in a high paced environment and be able to multitask while still being able to produce high quality work. You will be leading a group of technicians expected to test and deliver hardware at a high rate while maintaining quality. You will be working to constantly improve processes that will make impacts on the efficiency of the lab. You will also play a key role in the career growth of technicians on your team. BASIC QUALIFICATIONS- SHIFT REQUIREMENT: Fri-Sun 7am-7:30pm- 2+ years’ experience in Clean Room Manufacturing environment.- 2+ years’ experience of supervisory experience.- 2+ years’ experience in Environmental Test- 4+ Experience manufacturing in high traceability environment ...

Have you ever wanted to be part of a team who is building industry changing technology? Amazon’s Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband network connectivity to unserved and underserved communities around the world.Are you looking to create value for millions of customers by helping to develop creative assets for Kuiper? Do you want to work at a company where you are the owner, where you are encouraged to build, and where you have the autonomy to push boundaries? Do you have a passion for design and a desire to bring delightful, cutting-edge products and services to life in an entirely new way? This describes your daily journey. Are you ready? Then join us on Project Kuiper.Do you get excited by aerospace, space exploration, and/or satellites? Do you want to help build solutions at Project Kuiper to transform the space industry? If so, then we would love to talk!Key job responsibilities Amazon is seeking a bright, friendly, customer-obsessed and self-motivated Executive Assistant to join its Project Kuiper Team. This is a great opportunity to join a high functioning and growing team with plenty of new challenges & responsibilities for you to grow and further your professional career. Come and support on the most innovative and exciting Amazon Project to date! The ideal candidate will be professional, hold the highest of standards and be a fast learner with experience using sound judgement while working in a fast paced, goal-oriented, and ever changing work environment. They must have prioritization abilities to complete a high volume of complex tasks with minimal to no supervision. They will also be a detail oriented planner with the demonstrated ability to communicate and respond effectively and efficiently while maintaining flexibility, a sense of humor, and most importantly grace under pressure. Finally, the ideal candidate will be someone who wants to be more than “just an Admin” and is ready to build a deep and trusting, long-term professional relationship with our leaders. The Executive Assistant will be a key player of the team with the opportunity to take on special projects with increased responsibility. Responsibilities (including but not limited to): - Management of complex calendar and scheduling requirements. - Schedule cost effective air/hotel/ground transportation - Create a detail travel itineraries (including smooth transitions between time zones). - Complete and file expense reports; utilizing both domestic and international currencies. - Drive team activities (including org-wide meetings, social outings, and other key logistics). - Identify and coordinate most productive and cost effective method for meetings including in person, on-site, audio conferences (international stateside and local) and video conferences. - Close collaboration with departmental EA peers. - Responsible for all space planning activities within the organization. - Ability to work independently with minimal direction. - Serve as a business partner ensuring strategic, proactive and thoughtful support of the business cycle. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.About the teamHere at Amazon, we embrace our differences. We are committed to furthering our culture of inclusion. Amazon has ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences. Amazon’s culture of inclusion is reinforced within our 16 Leadership Principles, which remind team members to seek diverse perspectives, learn and be curious and earn trust.Work/Life BalanceOur team puts a high value on work-life balance. It isn’t about how many hours you spend at home or at work; it’s about the flow you establish that brings energy to both parts of your life. We believe striking the right balance between your personal and professional life is critical to life-long happiness and fulfillment. We offer flexibility in working hours and encourage you to find your own balance between your work and personal lives.Mentorship & Career GrowthOur team is dedicated to supporting new members. We have a broad mix of experience levels and tenures, and we’re building an environment that celebrates knowledge sharing and mentorship. We care about your career growth and strive to assign projects based on what will help each team member develop into a better-rounded professional and enable them to take on more complex tasks in the future.Innovation is part of our DNA! Our goal is to be Earth's most customer-centric company, and we are just getting started. We need people who want to join an ambitious program that continues to push the state of the art in space based systems design and wireless systems.We're dedicated to supporting new team members. Our team has a broad mix of experience levels and Amazon tenures, and we’re building an environment that celebrates knowledge sharing and mentorship. Our team also puts a high value on work-life balance. Striking a healthy balance between your personal and professional life is crucial to your happiness and success here, which is why we aren’t focused on how many hours you spend at work or online. Instead, we’re happy to offer a flexible schedule so you can have a more productive and well-balanced life—both in and outside of work.BASIC QUALIFICATIONS- 3+ years of senior level leadership support, or 1+ years of Amazon experience- High school or equivalent diploma- Experience with Microsoft Office products and applications- Experience with executive level calendar management ...

Project Kuiper is an initiative to increase global broadband access through a constellation of more than three thousand satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The Role:The Customer Terminals team is responsible for all software that runs on the terminal devices installed at Kuiper end customer's locations (homes, businesses, etc.). As a Senior Technical Program Manager (Sr. TPM) in this team, you will own multiple business critical programs that span different teams and disciplines, bring alignment across the organization, drive key decisions and tradeoffs, help unblock risks and ensure high quality and on-time deliverables. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS- Bachelor's degree in engineering, computer science or equivalent- 5+ years of project management disciplines including scope, schedule, budget, quality, along with risk and critical path management experience- 7+ years of working directly with engineering teams experience ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Innovation is part of our DNA! Our goal is to be Earth's most customer centric company, and we are just getting started. We need people who want to join an ambitious program that continues to push the state of the art in space based systems design.Key job responsibilitiesYou should be comfortable with a high degree of ambiguity and relish the idea of solving problems that haven't been solved at scale before. Along the way, we guarantee that you will learn a lot, have fun and make a positive impact on tens of millions of people.In this role, you will: • Architect and build software to automate hardware test systems • Develop software infrastructure to support test case execution • Architect and build automation to support development (CI/CD) • Align with various stakeholders on software requirements • Document software requirements from users • Support manufacturing as well as new product development • Enable automated data collection, data analysis • Deliver end-user documents • Own and execute software quality and release process • Work with electrical test equipmentExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeYou will have the opportunity to write software to test exciting products and help us bring our idea to reality. Your software will enable the team to validate our designs and ensure all our hardware is space-worthy. You will make daily decision on how to best create and deliver these tools.About the teamThis Software Development Engineer will have the opportunity to be a member of the Hardware Validation Team working within the wider Electrical Engineering Team (Avionics Verification and Test) . This highly collaborative group of engineers has a diverse range of backgrounds and knowledge and looking for help to build a scalable and reliable test automation solution. The team support both internal test needs as well as the needs of the manufacturing team. They like to leverage and share work across the entire organization as well as utilize AWS resources and tools to accelerate their work.BASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience programming with at least one software programming language- Experience programming in Python ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.As a Software Development Engineer you will own the development, implementation, and test of the operational procedures and tooling built to execute the Kuiper mission. You will work with engineering teams across ground and space systems, to understand how the system functions and deliver an integrated solution to prepare for and execute the mission. Because of the scale of the mission, you will be focused on driving automation and operational excellence — identifying areas of improvement and initiating changes to improve the productivity of the fleet.You will prepare for each launch and on-orbit demonstration, design and conduct operational rehearsals, and drive automation efforts with scalability in mind, ensuring that the constellation functions at peak performance with limited manual intervention. You work alongside flight directors to design and implement concepts of operation for missions and experiments, execute launch and early operations, develop and perform analysis on system data, build tooling to support operators, and identify areas and mechanisms for further improvement.The ideal candidate will be detail oriented, have strong organizational skills, able to work independently, juggle multiple tasks at once, and maintain professionalism under pressure. You should have deep knowledge software engineering practices, understand how software and hardware systems interact, and can drive design and implementation of operational execution of objectives in complex systems. Familiarity with space systems is desired.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.About the teamThe Mission operations Software Services team works across Kuiper to ensure we are able to successfully execute and iteratively improve on our on-orbit operations to deliver highly reliable customer service. We design and implement operational procedures and software that support mission operations and automation software and execute mission operations and demonstrations on-orbit. We analyze system performance and look for ways to drive improvement across the program to deliver the best customer experience possible.BASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience programming with at least one software programming language ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.As a PIT RF Engineer, you will be responsible for the development of various electronic hardware test set-ups in the Payload Integration and Test lab as well as in the field. You will work closely with engineering teams in the specification/design of these test set-ups and the build/procurement of test equipment for Kuiper prototype payload hardware. This is very much a hands-on role, and a successful candidate will have extensive experience in supporting the full development cycles of RF, communications, and space hardware through development, prototyping, and qualification procedures. You must be responsive, flexible, and able to succeed within a collaborative and fast-paced environment.Responsibilities · Working from schematics, diagrams, written and verbal descriptions, layouts, or defined plans to build out bench-top and rack-mounted test set-ups.· Building and modifying custom test harnesses, breadboards, and test fixtures in support of payload hardware tests.· Performing operational tests, system check-outs, and fault isolation on test set-ups, systems, and equipment. · Assisting in the development of lab processes, equipment scheduling, and work tracking.· Implementing, validating, and optimizing RF lab set-ups composed of antenna, measurement equipment, and prototype equipment. · Configuring test equipment for automated operation: satellite link emulator, spectrum analyzer, signal generator, etc. · Working with engineering teams to specify and procure a range of capital equipment to meet program development requirements – including signal generators, spectrum analyzers, channel emulators, network loading, and computing equipment.· Meeting with suppliers to select enabling lab technologies. · Keeping equipment in working order, and maintaining all service and calibration records.· Establishing lab layouts and facility utilities requirements (power, thermal loads, LN2, GN2).· Maintaining a safe operating environment, and ensuring the lab is in compliance with OSHA, ESD, Safety, etc.Export Control RequirementDue to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS· Bachelor's degree in Electrical Engineering or related discipline, or 2+ years of RF, satellite, aerospace, or related industry experience. · 2+ years of experience in RF design and/or verification with launched products. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Amazon seeks a Senior Electromagnetic Interference and Compatibility (EMI and EMC) Engineer to join the Antenna Team. As a Kuiper Sr. EMC/EMI engineer you will develop requirements, review designs and build test capability for complex payload subsystems for low-earth-orbit satellites. In this role you will influence decision makers on the process, procedures and necessary tests required to achieve EMI/EMC qualified hardware. You will execute tests and provide leadership for other engineers and technicians during test campaigns. The key responsibilities of the role are:• Define requirements for testing and qualifying subsystems• Perform analysis of radiated emissions and susceptibility (RE/RS)• Develop models for interference and shielding issues to mitigate and control emissions and susceptibility.• Work with electronic component design teams to communicate requirements related to electromagnetic environments such as shielding, grounding, bonding and isolation• Work with subsystem design owners on EMI related challenges • Define and coordinate EMI and EMC testing for a satellite and its subsystems• Coordinate requirements and validation with Launch Providers’ EMI and EMC teams.• Develop and maintain EMI/EMC test labs and equipment and support execution of EMI/EMC testing for a satellite and its subsystems• Identify emission and susceptibility non-conformance. Debug all failures to root-cause and provide manufacturable solutions.Export Control RequirementDue to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS- Bachelor’s degree in Electrical Engineering, Physics, or equivalent degree, or equivalent experience- 7+ years of experience in a hardware development role focusing on electromagnetic environments or EMI/EMC.- 5+ years of experience with defining and conducting EMI/EMC testing for electronic components and systems. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Be part of Project Kuiper’s sub-team responsible for defining and implementing the digital chip SOCs for communications via Low Earth Orbit satellites and Amazon gateways. This is a unique opportunity to define a groundbreaking wireless solution with few legacy constraints. The team works with customer requirements and wireless system teams to define modems, high-speed interfaces, embedded processors, and DSP solutions in latest CMOS generation technologies.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilitiesIn this role you will:· Work closely with the system architects to develop world-class SOC and IP blocks, which meet power, area and performance targets.· Define, configure and integration SoC Subsystems· Contribute to the SoC floor planning effort· Define and develop any necessary support logic· Configure, instantiate and integrate 3rd party IP blocks· Understand low power design & the impact of DFT on the blocks· Perform initial synthesis & timing analysis· Assist verification team in unit verification including test plan development· Assist with debug and bring-up About the team BASIC QUALIFICATIONS· Bachelor's degree in Electrical / Communications Engineering or related field, or equivalent experience · 7+ years of experience in digital design, preferably in SoC design and implementation ...

We are seeking a stellar Program Manager to join the Global Service Compliance (GSC) team supporting Amazon’s Project Kuiper. Amazon’s Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. We are looking for someone who is enthusiastic about technology, enjoys being continually challenged, and demonstrates sound judgment even in ambiguous situations.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilitiesWorking closely with the accounting, business, legal, engineering, and other teams, you will develop out-of-this-world strategies for handling compliance obligations in creative, business-centric ways that allow Kuiper to move quickly. As a Program Manager for Kuiper GSC, you will support and contribute to research, writing, implementation, and review of policy, process, and procedure documentation. A primary focus will be the use, storage, and provision of geospatial data to demonstrate Kuiper’s compliance with its global communications service provider obligations. You possess strong communication skills and are able to present complex information clearly and concisely. You are comfortable managing multiple responsibilities in a fast-paced environment and understand a broad range of analytics techniques and know how to use them to drive productive conversations, identify roadblocks, and routinely deliver results on time.BASIC QUALIFICATIONS- Experience using data and metrics to determine and drive improvements- 5+ years of program or project management experience- Experience owning program strategy, end to end delivery, and communicating results to senior leadership- Knowledge of Excel (Pivot Tables, VLookUps) at an advanced level and SQL- Experience using data and metrics to determine and drive improvements- Experience working cross functionally with tech and non-tech teams ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.We are looking for an experienced Software Development Engineer with exposure to AWS tools and services to help architect cutting edge test infrastructure. Our team is responsible for core infrastructure and tools that will serve as the backbone for automated satellite testing operations to enable rapid scaling of manufacturing processes.Key job responsibilities- Understand functional principles of Kuiper satellite hardware, software and all backend services that enable the operation of our constellation.- Provide technical leadership and contribute to the definition, development and implementation of test solutions for integrated satellite hardware and software in an ambiguous and complex problem space.- Build software solutions to manage infrastructure needed to operate our system in development and production environments.- Build software solutions to manage infrastructure needed to operate our system at large scale.- Collaborate with internal and external customers to define and implement system architectures for integrated test venues.- Lead technical roadmap definition efforts and decide what features and performance improvements to build.- Design and develop complex test commanding sequences that coordinate and synchronize equipment and services across multiple layers to verify function and performance of satellite hardware and software.- Instill best practices for software development documentation, making sure designs meet requirements, delivering high quality software on tight schedules.- Automate build, test and deploy pipelines.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeAs a Project Kuiper Software Development Engineer you will own the development, implementation and test of software for Kuiper integrated vehicle test venues. You will work with engineering teams across ground and space systems, to develop an integrated solution to test fully assembled satellite vehicles and ensure readiness for launch operations. You will be focused on driving automation and optimization of test processes.About the teamThe Integrated Vehicle Testing team is responsible for core infrastructure and tools that will serve as the backbone of automated satellite testing operations to enable rapid scaling of manufacturing processes.BASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience programming with at least one software programming language ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband internet connectivity to un-served and under-served communities around the world. In this role, you will be bringing that vision to life by architecting, developing and testing the communication systems payload software that provides the radio link connectivity between the satellites to customer-terminals and the ground-based internet gateways. Key job responsibilitiesIn this role, you will drive the design, development, and operation of a variety of key functions such as commanding, telemetry, power control, hardware interfaces, and autonomous capabilities for each satellite throughout its lifetime – from launch to de-orbit. In this role, you will: - Own unique embedded software functions through design, implementation (in C, C++, RUST or other), test, and integration in an embedded Linux or real-time operating system (RTOS) environment. - Write software to control silicon devices using proprietary and standard communication buses, such as Interlaken SerDes, JESD, PCIe, I3C, I2C, SPI, RS-422, RS-485, Ethernet, etc. - Work closely with hardware teams to support board design, bring-up, and verification, as well as integration and test. - Follow best practices in high reliability embedded software development to ensure very high levels of system reliability and availability.- Debug low-level issues at the intersection of hardware/FPGA/firmware/software on multicore SOCs.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. A day in the lifeCome work at Amazon! We need people who want to join an ambitious program that continues to push the state of the art in space-based systems design. Come help us solve the difficult and rewarding development challenges in building highly reliable, power efficient and low-cost satellite avionics and communication systems payload!About the teamOur team tackles many critical satellite payload functions including payload power management, hardware interfaces, command & telemetry, operational state management, thermal management, resiliency and redundancy, hardware and software integration. We are looking for an outstanding software engineer to participate in all phases of software development from requirements through implementation and test to operations.BASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience programming with at least one software programming language ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. Have you wanted an opportunity to develop the software applications and services for an advanced global internet connectivity service? The Kuiper Ground Gateway Services team is responsible for the software and services that operate on ground gateways and terminals. This team oversees the development of architecture, solutions, and a roadmap for managing embedded systems within antennas, as well as applications for site maintenance, telemetry, over-the-air updates, and various other features. As the Software Development Manager of this team, you will guide a group of engineers in addressing these challenges, while also focusing on team development and upholding a high standard for delivery quality.Export Control RequirementDue to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Key job responsibilities- Recruit and develop top talent to achieve the team's objectives.- Establish and steer the team's long-term vision.- Manage resource allocation to meet both business objectives and career development targets.- Participate in strategic planning to achieve technical and business goals.- Collaborate closely with engineers to design and implement optimal technical designs and strategies.- Ensure project timelines are met, prioritizing tasks and managing team workload effectively.- Foster a culture of innovation and continuous improvement within the team.- Maintain close collaboration with cross-functional teams to align software development with overall company goals.- Monitor and ensure adherence to quality standards and best practices in software development.- Provide regular performance feedback and career development guidance to team members.BASIC QUALIFICATIONS- 3+ years of engineering team management experience- Bachelor's degree- Knowledge of engineering practices and patterns for the full software/hardware/networks development life cycle, including coding standards, code reviews, source control management, build processes, testing, certification, and livesite operations ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.We are looking for a highly motivated and experienced SAP S/4 Global Trade and Order to Cash resource with expertise in managing end to end processes including Customs management, Compliance management, Product classification, managing and supporting ITAR regulation product classification, Sales order to billing processes and knowledge of EDI integration with external partners, integration to SAP Procurement within a manufacturing environment. The ideal candidate will oversee the technical and functional support for software product development in SAP S/4 RISE, and integration with SAP Global Trade and financial applications to ensure alignment with business objectives.Export Control Requirements: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities• Analyze business and customer requirements related to SAP S/4 Order to Cash and Global Trade process including and not limited to master data governance, Sales Order management, Pricing, Delivery and Billing to customer.• Develop feature design leveraging SAP S/4 RISE, SAP Business Technology Platform (BTP) and GTS.• Define and prioritize product features and requirements for timely and successful delivery.• Communicate with internal stakeholders to align the product roadmap with business objectives.• Manage EDI integrations with external business partners (customer and vendor) and internal integration with Amazon Kuiper financial systems.• Participate actively in Unit Test, System Integration Test, User Acceptance Test, and Training.• Drive product discussion vision, goals, and monthly business review with executives, focusing on business users' adoption and support user training.BASIC QUALIFICATIONS- Bachelor's degree- Experience owning/driving roadmap strategy and definition- Experience with feature delivery and tradeoffs of a product- Experience contributing to engineering discussions around technology decisions and strategy related to a product- Experience in representing and advocating for a variety of critical customers and stakeholders during executive-level prioritization and planning ...

Do you want to be part of a team that is building industry changing technology? Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). It's mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity. We're looking for a Mechanical Engineer with a background in design and analysis of Avionics mechanical enclosures for printed circuit board assemblies (PCBA) on satellite systems. The ideal candidate has experience performing line replaceable unit (LRU) specific design and analyses such as random vibration analysis and hand calculation sizing based on quasi-static accelerations. Key job responsibilities- Mechanical design and layout trades contributing to overall system architecture configuration selection, requiring knowledge and experience in understanding, collaborating and trading complex inputs from multiple other disciplines – Electrical, RF, Thermal, Dynamics, Mechanisms, Materials, Manufacturing, Assembly, and Test.- Generate detailed designs with 3D CAD assemblies/components and 2D drawings as deliverables.- Conduct static, dynamic, and modal structural analysis as needed to support design work.- Deliver efficient designs capable of high volume production throughput (DFM, DFA).- Documentation and presentation of materials for technical design reviews.- Design and support test campaigns, both development and qualification/acceptance, for space hardware.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. A day in the lifeThis is a hands-on role for a highly collaborative individual that combines technical and analytical capabilities to convert analytic trade studies to a qualified physical design, while optimizing for high volume production and meeting cross-discipline requirements. The candidate will design, analyze, and test secondary structures while ensuring all requirements are met. BASIC QUALIFICATIONS- Bachelor's degree in mechanical engineering or equivalent- 4+ years of working in mechanical engineering or equivalent experience- Experience with prototyping and implementation ...

Our goal is to be Earth's most customer centric company, and we are just getting started. We need people who want to join an ambitious program that continues to push the state of the art in space-based systems design. Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.We're looking for a hands-on Systems Engineer with a background in the requirements management, design for manufacturing, hardware/software development for hardware test.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilitiesThis is a role for a highly collaborative individual who will help us with optimizing for high volume production and meeting cross discipline requirements.We are looking for an outstanding engineer who combines superb technical and analytical capabilities with a demonstrated ability to get the right things done quickly and effectively:* Lead the development test system validation * Lead software/hardware integration testing * Lead innovative software/firmware/hardware architectures and flows for multiple manufacturing test lines* Lead review and analysis on data using tools such as MATLAB, Python, or similar.* Support and organize the release of the software and hardware system documents through gate reviews * Investigate and troubleshoot yield issues during prototype and production builds* Write status and/or build reports for cross-functional review* Drive and prioritize execution of system test campaigns * Design and develop software/scripting test setups and supporting hardware for various subsystem validation of the satellite bus.* Identify and analyze the cross-functional tradeoffs between design alternatives, including impact on performance, schedule, cost, risk, complexity, and scale.* Drive cross-functional schedules, test requirements, specifications and limits with the hardware development team* Work concurrently with the design engineers to provide design for testability (DFT) feedback throughout the design process* Support production and integration efforts for hardware subsystems.* Define test strategy, implement and optimize test setup/processes at the CM including design and qualification of test fixtures, test equipment, and test software* Develop procedures, preventative maintenance plans, and troubleshooting guides to support production* Develop and communicate system integration and evaluation strategies and plans in support of program learning, technical risk reduction, verification, and validation* Interested and able to travel domestically and internationallyA day in the lifeYou will tackle challenging, novel situations every day and have the opportunity to work with multiple technical teams at Amazon in different locations. You should be comfortable with a high degree of ambiguity and relish the idea of solving problems that haven't been solved before.BASIC QUALIFICATIONS- Experience in automating, deploying, and supporting large-scale infrastructure- Experience programming with at least one modern language such as Python, Ruby, Golang, Java, C++, C#, Rust- Experience with Linux/Unix- Experience with CI/CD pipelines build processes- Bachelor’s or Associates Degree in Computer Science or related field or relevant work experience ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.As a DSP Modem Embedded Software Design Engineer, you will participate in all phases of DSP physical layer software development from requirements through implementation and test to operations. Our team tackles all of the layer 1 tasks on the satellite system. Key Responsibilities: - Develop embedded software in assembly, C, and C++ in a real-time operating system environment for broadband satellite modem systems. - Write real-time critical software to augment and interact with hardware blocks such as FFT, correlator, codec, DPD, etc. - Write device drivers and system applications for satellite broadband link management. - Work closely with modem and hardware teams to support board bring-up, integration, and testing.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS - MS degree in DSP, signal processing or related field OR Bachelor’s Degree with 2+ Years of DSP Modem experience or equivalent experience. - 5 + years of non-internship professional software development experience including code development methodologies, debugging, version control, and code maintenance. - 5+ years of experience with DSP modem development and test. - 3+ years of experience with wireless communications systems such as 3/4/5G, WIFI, or other OFDM systems. - 3+ years of experience with functional DSP modem blocks such as FEC, FFTs, filters, synchronization, digital pre-distortion, multiple access, equalization, AGC, ACM, etc. ...

Project Kuiper is ambitious initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. The Kuiper Software group is responsible for all production software at Kuiper. The Software Health Automation team owns the Kuiper Software lab and provides lab as a fully managed service. We make it possible to develop, build and test the code on real hardware. In this role, you will design, build and maintain the lab infrastructure. You will be hands on, making sure lab environments are highly available, while scaling team’s processes to ensure long term success. You will work hand in hand with development teams from software and hardware as well as program management and other stakeholders to make sure we can rapidly deliver high quality software.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities* Design, set up and maintain test fixtures to verify software on real hardware, create and maintain lab documentation* Troubleshoot hardware, software and networking issues* Contribute to engineering efforts from design to implementation, solving complex technical challenges around developer and engineering productivity and velocity especially as it relates to rapid test iteration* Drive adoption of best practices in testbed maintainability* Manage equipment stock, procure lab equipment* Participate in lab on-call rotation to ensure lab equipment uptime meets SLA* Provide lab services to people working remotely (be the eyes and hands in the lab)* Provide technical support to customers using the labA day in the lifeThe successful applicant will be experienced in keeping technical infrastructure running smoothly and balancing high priority issues. You should be comfortable taking on ambiguous challenges like setting up new pre-production hardware for the first time. You should be able to define standard operating procedures, metrics and alarms to keep the infrastructure highly available and expand technical capabilities over time. You will be invaluable to enabling the team to move quickly and confidently with robust infrastructure that scales with our customers.About the teamThe Kuiper Software Health Automation team owns labs and tools for developing and verifying the quality of our networking software. This software will be operating both on the ground and in space. The team raises our high quality bar before our software reaches customers.BASIC QUALIFICATIONS* Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering or comparable industry experience.* 2+ years of non-internship professional IT experience in any of the following: test lab support, operational hardware support.* 2+ years experience organizing and maintaining stock of critical test equipment, third party devices, prototype devices for troubleshooting and debug.* 2+ years experience in project management skills including resource planning, managing schedules, reporting project status and prioritizing own tasks and those of other team members for multiple projects.* Manage your own time and work well both independently and as part of a team.* Excellent written and verbal communication skills, and an ability to interact efficiently with peers and customers.* Highly organized and autonomous, very detail oriented and willing to learn new skills. ...